Best FRP Bypass Tools for PC 2026: Free Download + Complete Guide

FRP bypass tool for PC is what most people end up searching for after spending an hour trying APK methods that don’t work on their device. The reality in 2026 is that no-PC methods have become increasingly unreliable on Android 12 and above. PC based tools go deeper, push commands at a system level that APK tricks can’t reach, and get updated faster to keep up with new security patches. This guide covers every major free PC based FRP bypass tool available in 2026, compares them honestly, and links to complete individual guides for each one so you can go straight to what works for your device.

All download links are in the individual tool guides linked throughout this page and on our FRP Tools page.

⚠️ Disclaimer

The tools and methods on this page are for educational and informational purposes only. Only use them on devices you personally own or have been given explicit permission to work on. Bypassing FRP on a device you don’t own is illegal and can result in serious legal consequences. Always comply with Google’s terms of service and your device manufacturer’s policies. Rise ROM does not support any unauthorized or illegal use of the tools shared here.

Why FRP Bypass Tools for PC Work Better Than APK Methods on Newer Android

This is worth understanding before you pick a tool because it explains why you’re reading this page after APK methods failed.

APK based FRP bypass works by exploiting openings in the Android setup wizard. These openings let you access a browser, download an APK, install it, and add a Google account to bypass verification. The problem is that Google and device manufacturers patch these openings with every major Android update. On Android 12 and above the setup wizard has been significantly hardened and most of the browser access points that APK methods relied on no longer exist.

PC based tools work differently. They connect to the device through ADB, EDL mode, Preloader mode or MTP mode and push bypass commands directly to the system partitions. This happens below the Android software layer where the setup wizard restrictions don’t apply. That’s why PC tools continue to work on newer Android versions where APK methods fail.

The honest caveat is that even PC tools have limits. On Android 14 and above with very recent 2025 and 2026 security patches even the best free PC tools have reduced success rates. The patches Google pushes affect EDL and ADB connections too. But the threshold is much higher for PC tools than APK methods. An APK method that fails on Android 11 might still work as a PC tool operation on the same device.

One more thing worth saying clearly before you pick a tool. There is no single PC tool that works on every device and every Android version in 2026. The right tool depends on your device brand, chipset, Android version and security patch date. That’s exactly why this comparison exists.

Quick Comparison Table

Here’s an honest side by side look at every major free PC based FRP bypass tool in 2026:

The credits column is the most important one for your budget. SamFw, ZeroKnox, Prime Tool X and HalabTech are all completely free. AMT Tool requires purchased credits for most operations. GSM Flasher ADB is free but has more limited Android version coverage than the others.

Tool 1: SamFw FRP Tool V5.4

SamFw FRP Tool is the most widely used free Samsung FRP tool among repair shops and the most natural first choice for anyone with a Samsung device. Version 5.4 is the current release and it covers Samsung FRP removal, soft brick recovery, CSC changes, Samsung account removal via ADB, KG lock handling and basic Odin flashing from a single clean interface.

The free version works on Samsung devices with security patches before December 2022. Anything newer requires SamFw’s paid server credits. The tool tells you your patch date immediately after detecting the device so you know upfront whether the free bypass applies before you spend any time on steps.

Beyond FRP it handles more Samsung repair scenarios than most people realize making it a genuinely useful tool to have installed regardless of which specific operation you need.

Best for: Budget Samsung A series, M series and J series with patches before December 2022. Repair shops doing high volume Samsung work who are comfortable paying for credits on newer devices.

Not ideal for: Devices with 2023 and newer patches if you need a completely free solution.

For the complete step by step guide, supported Samsung models table and direct download links read our full SamFw FRP Tool guide.

Tool 2: ZeroKnox Removal Tool 2.4

ZeroKnox Removal Tool is arguably the most capable completely free Samsung tool available right now. Version 2.4 released in late December 2025 added Android 16 FRP support and improved handling for 2025 and 2026 security patches making it one of the most current free options in this comparison.

What makes ZeroKnox genuinely different from SamFw and Prime Tool X is that it handles Knox Guard lock removal alongside FRP. If the Samsung device you’re working on has a KG lock from a finance company or carrier on top of the regular FRP lock, ZeroKnox is one of the only free PC tools that addresses both in the same session without needing credits.

It offers three Enable ADB methods for FRP removal and four separate KG removal methods. This flexibility dramatically increases success rates across different Samsung models since different devices respond to different approaches.

One thing to be upfront about: ZeroKnox has no official distribution website. The developer distributes it through community channels which means you need to be careful where you download it. The link on our ZeroKnox guide page is a verified clean build.

Best for: Samsung devices on Android 13 through 16, devices with both FRP and Knox Guard locks, repair shops handling a wide variety of Samsung models who need multiple bypass approaches available.

Not ideal for: Non-Samsung devices, flagship Samsung models with very recent 2026 patches where even version 2.4 can struggle.

For the complete guide including Knox Guard removal steps, all three ADB methods and download link read our full ZeroKnox Removal Tool guide.

Tool 3: Prime Tool X V9.0

Prime Tool X is the most beginner friendly tool on this list. It’s completely free, requires no credits, no account registration and no complex driver setup outside of what the tool installs for you from its own interface. The workflow is three clean steps: Enable ADB, Remove FRP, Patch Device. Each step can be verified before moving to the next which makes troubleshooting straightforward even if you haven’t done this before.

Version 9.0 released in February 2026 added Android 16 FRP support and removed the need for Zadig driver setup on Qualcomm Samsung devices which was a constant pain point in earlier versions. The left sidebar shows supported models clearly so you know immediately whether your specific device is covered before attempting anything.

The main limitation is coverage. Prime Tool X works best on budget and mid range Samsung A series, M series and J series devices. High end flagships and very recent models aren’t always in the supported list. Xiaomi support is limited to the Redmi A3 only.

Best for: Beginners and repair shops who want the simplest possible workflow, budget Samsung devices, anyone who wants a completely offline free tool with no server dependency.

Not ideal for: High end Samsung flagships, Knox Guard locks (Prime Tool X handles FRP only), Xiaomi devices other than Redmi A3.

For the complete guide including the supported models list, all three bypass steps and download link read our full Prime Tool X guide.

Tool 4: HalabTech FRP Tool

HalabTech FRP Tool takes a completely different approach from every other tool on this list. While SamFw, ZeroKnox and Prime Tool X use ADB connections and diagnostic mode access, HalabTech works through MTP mode. That means you connect the phone normally via USB the same way you’d plug it in to transfer files. No Download mode, no button combos, no special boot state.

This simplicity is its biggest advantage for newer Samsung devices where triggering the correct boot mode can be its own challenge. You connect normally and the tool handles the rest.

The dedicated Samsung Android 16 FRP tool released in March 2026 is extremely lightweight at around 5 to 10MB compared to most Samsung tools that run 50MB or more. It installs fast, runs fast and doesn’t have the setup overhead that heavier tools carry.

The critical limitation nobody covers clearly is the firmware date cutoff. The Android 16 bypass in HalabTech only works reliably on Samsung devices with firmware dated December 2025 or earlier. Samsung patched the specific vulnerability this tool uses in their January 2026 firmware update. Always check the firmware build date before spending time on this process.

Best for: Samsung devices running Android 15 and 16 with firmware before January 2026, technicians who want the simplest possible no-boot-mode approach.

Not ideal for: Devices with January 2026 or newer firmware, Knox Guard locks, older Android versions where other tools are more capable.

For the complete guide including the firmware cutoff explained, step by step MTP mode process and download link read our full HalabTech FRP Tool guide.

Tool 5: AMT Tool V1.3.5.2

AMT Tool is the most powerful option on this list and the only one that requires credits for most operations. Understanding why it costs credits and what you get for that cost is important before deciding whether it’s right for your situation.

The reason AMT Tool consistently delivers the highest success rate across different device brands and security patches comes down to server side authentication. When a new security patch drops and free tools fail, AMT Tool’s server gets updated to handle the new bypass method within days. You don’t need to update the software itself since the intelligence lives on the server. That’s the practical advantage of the credit model that nobody explains clearly in other guides.

Beyond Samsung, AMT Tool covers Xiaomi, Oppo, Realme, Vivo, Motorola, Tecno, Infinix and Nothing Phone across MediaTek, Qualcomm, Unisoc and SPD chipsets. In terms of raw device coverage it’s the most comprehensive free to paid tool in this entire comparison by a significant margin. If you’re a repair shop handling a wide variety of brands daily, having AMT Tool available alongside the free Samsung specific tools covers almost every scenario you’ll encounter.

Version 1.3.5.2 released March 2026 added Nothing Phone series support, Realme MediaTek AUTH support, Samsung S22 Ultra and S23 Ultra, and improved Xiaomi EDL and BROM authentication among other updates.

A yearly license runs around $40 to $45 USD which works out to a small fraction of the revenue from repairs it enables for a busy shop. For someone fixing one personal device the free tools are the right starting point.

Best for: Repair shops handling high volume work across multiple brands, anyone whose device the free tools have consistently failed on, technicians who need one tool that covers Samsung alongside Xiaomi, Motorola and other brands.

Not ideal for: Users who need a completely free solution, one-off personal repairs where paying for credits isn’t practical.

For the complete guide including all supported brands, credit system explained, installation and download read our full AMT Tool guide.

Tool 6: GSM Flasher ADB Bypass FRP Tool

GSM Flasher ADB Bypass FRP Tool is a lightweight free option that hasn’t been covered on Rise ROM yet and deserves a mention here. It’s been around for several years and while it doesn’t have the broad device support or regular updates of the tools above it fills a specific gap for Samsung devices on older Android versions via ADB.

The tool works by pushing ADB commands to the Samsung device to enable USB debugging from the locked state and then executing an FRP reset through the ADB connection. The process is straightforward and requires no credits, no account and no server authentication.

The honest limitation is Android version coverage. GSM Flasher ADB works most reliably on Android 8 through 13. On Android 14 and above Samsung’s ADB security changes make this approach much less reliable. It also only covers Samsung devices unlike the multi-brand tools above.

One thing worth noting about the download situation: like several other free tools in this niche GSM Flasher ADB has no official distribution site. Download from trusted sources only. Verify the file before running it.

Best for: Samsung devices on Android 8 through 13 where SamFw and ZeroKnox haven’t worked, repair technicians looking for a simple ADB-based alternative with no credits or server dependency. EaseUs-link

Not ideal for: Android 14 and above, non-Samsung devices, Knox Guard removal.

What You Need Before Using Any PC Tool

This applies to every tool on this list. Get all of this ready before downloading anything:

A Windows PC running Windows 10 or 11. All six tools on this list are Windows applications. Some work on older Windows versions but 10 and 11 give the best driver compatibility and most stable experience. None of these tools work on Mac or Linux.

A USB data cable that supports data transfer. Not a charging only cable. This causes more failed repairs than any other single factor. If the tool isn’t detecting your device the cable is always the first thing to check. Try a different cable before changing any settings or drivers.

The correct USB drivers for your device’s chipset. Samsung USB drivers for Samsung devices. Qualcomm QDLoader 9008 drivers for Qualcomm chipsets. MediaTek VCOM drivers for MediaTek devices. Without the right drivers installed no PC tool will detect your device regardless of anything else you do. Download everything you need from our drivers page.

Admin rights on your PC. Every tool on this list must be run as administrator. Right click the executable and select Run as Administrator every time you open it. Running without admin rights causes detection failures that look like driver problems but aren’t.

Your device charged to at least 30%. PC based operations involve putting the device into special boot modes and restarting it. A dead battery mid-operation can leave the device in an incomplete state that’s harder to recover from than where you started.

Antivirus temporarily disabled. Most free PC FRP tools are flagged as suspicious by antivirus programs because of how they communicate with device hardware at a low level. This is a false positive but it can prevent the tool from running if your antivirus deletes files during extraction or launch. Disable it temporarily while setting up and running the tool then re-enable it when done.

Microsoft Visual C++ 2015 or above. Most Windows installs already have this. If any tool on this list crashes immediately on launch this is almost always the reason. Download it free from Microsoft’s official site.

General Step by Step PC Bypass Workflow

The specific steps vary between tools but the general workflow is consistent across all PC based FRP bypass operations. Understanding this flow helps you troubleshoot when individual steps don’t go as expected.

Step 1: Install drivers first Before connecting any device install the correct drivers for your device’s chipset. Check Device Manager after installation to confirm the drivers show without yellow warning icons. Restart your PC after driver installation.

Step 2: Open the tool as administrator Right click the tool executable and select Run as Administrator every single time. Never double click to open directly. This is the most common mistake people make and it causes detection failures that are easy to misdiagnose as driver issues.

Step 3: Put device in the correct mode Different tools use different connection modes. For most Samsung tools the device needs to be in Download mode (hold Volume Down and connect USB) or accessible via ADB from the setup screen. For MediaTek tools the device enters Preloader or BROM mode (hold Volume Down and connect USB while powered off). For MTP mode tools like HalabTech you just connect normally while the device is on the FRP screen.

Step 4: Connect and wait for detection Once the device is in the correct mode connect the USB cable. The tool should detect it within 30 seconds and display the model name, chipset and Android version. If it doesn’t detect within that window try a different USB port, try USB 2.0 instead of 3.0, and check that the cable is a data cable not charging only.

Step 5: Run the bypass operation Once detected select the FRP removal or bypass function relevant to your device. Most tools will show you what the operation will do before you confirm. Click Execute or Start and do not disconnect the cable during the process. Watch the log area at the bottom of the screen for progress updates.

Step 6: Cold restart after completion When the tool shows a success message disconnect the cable and hold the power button until the device fully shuts down. Wait 10 seconds then power it on manually. Never let the tool trigger an automatic restart. A clean cold boot after FRP operations is important for the changes to take full effect.

Step 7: Complete normal setup Go through the regular device setup process. Add any Google account you have access to. The FRP verification screen should be gone.

Errors and Fixes

No tool detects the device regardless of which one you try This almost always points to one of four things. Wrong or missing drivers. Charging only cable being used instead of a data cable. Tool not running as administrator. Device not in the correct mode for that specific tool. Work through all four before assuming the tool has a problem. These four causes account for the vast majority of detection failures across every tool on this list.

Tool detects device but bypass function is greyed out or fails immediately Your device’s security patch is newer than what the tool supports. Check the patch date in Settings then About Phone then Software Information. Match it against the Android version support column in the comparison table above and try a tool that covers your patch level. If no free tool covers it AMT Tool with credits or a firmware downgrade are your realistic options.

Bypass completes but FRP screen still appears after restart Do a proper cold restart. Hold power until the device fully shuts down, count 10 seconds, then power on manually. Never let the tool auto restart the device after an operation. If the screen still appears after a clean cold boot run the bypass operation a second time. Some devices need two passes before the changes fully commit to the partition.

ADB connection drops during the process A loose cable or a PC going to sleep mid-operation are the two most common causes. Try a different cable. Make sure your PC power settings are set to never sleep while the tool is running. USB 2.0 ports maintain more stable ADB connections than 3.0 on most repair tools.

Antivirus keeps deleting tool files Set the folder exclusion in your antivirus before extracting the downloaded archive not after. During extraction some antivirus programs scan and delete flagged files as they’re written to disk. Setting the exclusion on the download destination folder before extracting prevents this completely.

Samsung device not entering Download mode Try the button combination more slowly and make sure the device is completely powered off before starting. On some Samsung models the sequence is Volume Down plus Volume Up plus Power all together not just Volume Down and USB connection. On newer Samsung models a USB cable connection while powered off sometimes triggers Download mode without any button press.

Driver shows yellow warning icon in Device Manager The driver installed but isn’t working correctly. Right click the device in Device Manager and select Update Driver then Browse my computer for drivers. Point it to the folder where you extracted the driver package. If the yellow icon persists try uninstalling the driver completely, restarting the PC and reinstalling fresh from our drivers page.

FAQ

Related Tools

Every tool covered in this guide has its own dedicated page on Rise ROM with complete step by step guides and direct download links.

SamFw FRP Tool — Complete guide with free vs paid explained, supported Samsung models and V5.4 download.

ZeroKnox Removal Tool — Full guide covering FRP and Knox Guard removal, all three ADB methods and verified 2.4 download.

Prime Tool X — Complete guide with three step bypass process, supported model sidebar and V9.0 download.

HalabTech FRP Tool — Full guide covering MTP mode bypass, the firmware cutoff explained and direct download.

AMT Tool — Complete guide covering all supported brands, credit system and V1.3.5.2 download.

If you need APK based no-PC methods instead check our FRP Bypass Without PC guide which covers five working no-PC methods for all Android versions.

For drivers needed by any of these tools visit our drivers page. For firmware files check our firmware page.